October 2, 2018
By: Ben, 1988 (Tadley, United Kingdom)
Comments
Very Useful
Pros
Has imperial and metric
Cons
None
EBB Best book for machinist
October 2, 2018
By: Eetu (Savonlinna, Finland)
Comments
Best book for machinist! Very usefull information for everyone.
Pros
The drill sharpening template
Cons
Havent experienced yet nothing.
Bjørn André
September 28, 2018
By: Bjørn André (Jevnaker, Norway)
Comments
Veru usefull book every machinist should have
Pros
Have the information you need and very good build quality
Cons
The rear cover wont closing properly
Finally my own Black Book
September 27, 2018
By: Henry Ellingsen (Edgewood, United States)
Comments
Every machinist should have his own Black Book.
Pros
The durability of the pages is great. Clearly printed, well laid out and very easy to read.
Cons
None other than the rear cover not closing properly. The metal spline is in the way.
Handy book
September 26, 2018
By: John R., student (ODESSA, United States)
Comments
Good size, lots of info
Pros
Seems to be well thought out.
Cons
Needs sticky tab for "INDEX".
The back cover is on the wrong side of the metal spline causing it to not close properly.
Engineers Blackbook 3rd Ed.
September 25, 2018
By: Anthony Clark (Virginia Beach, United States)
Comments
Well Done
Pros
Well layed out and segregated logically
Cons
I realize its purpose is to be a pocket companion but I wish it had even more info in it or if it was broken up into multiple volumes.
bkacjbiij
September 23, 2018
By: Jason Sweigart (reading , United States)
Comments
Good information
Pros
Machinist info metal info ect.
Cons
None
Black book
September 22, 2018
By: Ren, Rens engineering (Rowella, Australia)
Comments
A great help
Pros
Tons of information
Black book
September 22, 2018
By: Ren, Wizard watercraft (Rowella, Australia)
Comments
Extremely handy
Pros
Great information
Welding
September 18, 2018
By: Erik Skog (Vellinge, Sweden)
Comments
It would be nice if you included som data for welding. For Tig and Mig amps vs thickens for various materials. Differens gases. Filler materials etc etc
pennsylvania
September 17, 2018
By: Ben smyser, m and b machine (mechanicsburg, United States)
Comments
Great info provided in a easy to use format. A must have for any machinist.
Engineers book
September 15, 2018
By: Russ Barrow (Newport , United States)
Comments
Wow tons of info !!!!!!!
Engineers black book 2nd edition
September 14, 2018
By: Mark Garrod, Home (Rushden, United Kingdom)
Comments
A Must Have for beginners
Pros
Nice clear and concise for a beginner.
Cons
None that I can see.
Black book
September 13, 2018
By: jack paterson (Avoch, United Kingdom)
Comments
Chicken soup
engineers black book
September 13, 2018
By: scott murphy, boral (brisbane, Australia)
Comments
this book is easy to understand and is well used by beginner apprentices to qualified tradesman
Pros
well layed out and good amount of knowledge contained
Cons
writing can be a bit small for older workers
SUPERB LITTLE BOOK
September 11, 2018
By: Paul Emmerson, Alpha Engineering (Selby) Ltd (Selby, United Kingdom)
Comments
A little book with a lot of handy information. Every engineer should have one!
Pros
Clear and easy to read layout. Superb amount of useful data. Pages can be wiped clean in a workshop enviroment.
Cons
Not much at all. Maybe would benefit from colour coded sections or page edges?
Storage for white ink marker
September 11, 2018
By: Andee Peters, Logicar (Cranbourne North, Australia)
Comments
Very handy pocket sized book, full of information.
Cons
Colour coded pages would be great
Black Book
September 9, 2018
By: Paul Donaldson, Donaldson Fabrication (Perth, Australia)
Comments
One of the best books I have ever purchased
Pros
Loads of extremely useful information
Cons
Coast
Awesome little book
September 7, 2018
By: James swift (Portland,Tn, United States)
Comments
Very well thought out book
Pros
Pocket sized, very durable, and easy to read
Cons
None found yet
Great Reference
September 7, 2018
By: Rob McGuiness (Port Lincoln, Australia)
Comments
Great information easy to follow
Pros
Im not an engineer by trade just a back yarder and when your not doing it all the time you forget stuff. This is a great reference for me
Does the Inside Back Cover of your book contain a hologram as pictured? If so, click here. If not, please continue leaving a review.
