October 25, 2021
By: Zack Venable (Florence, United States)
Comments
The book is very well organized and easy to understand. I have recently taken a design engineering position and this will be a great resource to reference often.
Pros
Large print book is the perfect size.
The pages are coated with a water/oil resistant coating that makes them easy to flip.
The pictures/diagrams make the formulas and call outs easy to understand.
The taps that are included make it easy to place what I want on there and leave off the ones I don't intend on referencing.
Cons
I had to open every individual page in order to release it from the previous page. It looks like the machine used to punch to binding holes was not very sharp when it got to this book.
A few pages had mistakes such as random lines that were printed or small wrinkles in the pages.
Must Have Book
October 21, 2021
By: Garry Miles (Bywong, Australia)
Comments
Must have!
Pros
Comprehensive.
Cons
None I can identify.
very good
October 17, 2021
By: Don Clark (Victoria, Canada)
Comments
well done use it all the time just what i need thanks
Engineers black book 3rd edition
October 12, 2021
By: brandon lawson (SOUTHWEST HARBOR, United States)
Comments
Very handy book to have in my apron!
Pros
Easy to find sections, color pages, great charts
Cons
Could include more formula examples for a beginner
2nd Electrical black book .
October 12, 2021
By: Michael (Ipswich, Australia)
Comments
Good all rounder for an industrial workplace .
Pros
Small enough to carry everywhere .
Cons
Too much emphasis on AWG for Australia but interesting to find the equivalent for American cable sizes .
Absolutely incredible little book
October 9, 2021
By: michael johnson, BHP (Kingsley, Australia)
Comments
I always reference this book to confirm my work as a machinist and maintenance fitter this book is absolutely vital in my line of work
I have v2 and v3 engineers book v2 fastners & v2 electrical
I previously commented the version 2 could include pipe sizes etc then checked my version 3 seen it was included
Pros
its always right
Cons
I missed out on the promotional offer of machinists calculator with my purchase
Need to include flange sizes?
a whole other book could be done on hydraulics and pneumatics including hose types pressures and fitting perhaps, ill be the first to buy it
Metric Benchtop edition
October 7, 2021
By: Steven Godfrey (New Norfolk, Australia)
Comments
I had the original edition when I did my apprenticeship and I have now brought the Metric Bench top edition. It is great to see how much information has been added over the years. An invaluable resource that should be part of everyone's tool box.
Pros
Benchtop edition is great fo older eyes, Well presented information with good charts and diagrams, love the low glare laminated pages. much better than getting differing information from google.
Cons
Would have been nice to have Model Engineer (ME) threads included.
Excellent Reference for anyone
October 5, 2021
By: Jim Stephens (Manor, United States)
Comments
What I've been looking for ... finally found it!
Pros
Precise and informative information, easy to look up and factual data only.
Cons
None
Very Handy
September 29, 2021
By: Cameron (Ipswich, Australia)
Comments
Very handy when memory is going .
Pros
Easy to read .
Cons
Pricey .
Mr
September 26, 2021
By: Gerhard Heslop, Efficient Technologies NZ ltd (Auckland, New Zealand)
Comments
Excellent reference book
Pros
Good size and tabs are great
Engineers Black Book: Third Edition
September 22, 2021
By: Lane (Orange, Australia)
Comments
I had the pocket sized second edition throughout my apprenticeship and recently purchased the workbench third edition. Great quick reference guide for information not used daily. I dont know many tradies that dont have a black book in their toolbox!
Pros
The variety of information and the way is set out is great. Much faster then searching through varied results in google. The book creates a go to source of information for everyone.
Cons
Having the tightening torque specs within the book would really complete it.
A saving reference
September 16, 2021
By: William Vinson, Missouri S&T (Rolla, United States)
Comments
Great for reference in all settings. Useful in shop and in lab for conversions and what not. Personally purchased for the drill bit references to have on hand.
Pros
Great Diagrams, lots of information, durable, well
Organized.
Cons
Self placed tabs were a little wonky, but that’s mostly my error. Look forward to buying the rest.
A shop nessacity
September 15, 2021
By: Scott Maxwell (Oakland, United States)
Comments
A fantastic reference. Easy to use. Faster than Google. And way more dependable than a dubious web result.
Pros
Durable, well organized and well written.
Cons
Now I want to order all the other books in the series.
Engineers Black Book
September 13, 2021
By: Richard Richey (Saratoga Springs, United States)
Comments
Just received my Engineers Black Book and have already found some great information that is going to be very useful.
Pros
Ring book, thick plastic coated pages, lots of information on different topics
Cons
I should have ordered it sooner!
Engineers Black Book
September 10, 2021
By: DM, JWA (Eccleshall, United Kingdom)
Comments
Excellent
Pros
Easy to read, easy to clean, all the info you need
Cons
None
Review
September 10, 2021
By: Jack (Newcastle, Australia)
Comments
Great love the size
Pros
Good size
Cons
Expensive
Engineers Black Book
September 6, 2021
By: PatH (Walnut Creek, United States)
Comments
Great book - everything I need at my fingertips.
Black book review
September 5, 2021
By: Zach Klein (Puckapunyal, Australia)
Comments
Excellent reference book. Well presented and durable construction.
Pros
Well laid out for easy reference.
Cons
None!
ENGINEERS BLACK BOOK - 3rd EDITION ( METRIC )
September 4, 2021
By: warren newby (BLUEWATER, Australia)
Comments
great book for the home hobbyists
24 hr information .
September 4, 2021
By: Michael (Ipswich, Australia)